Click image to view full size image
Description There are various benefits for waterjet cutting like:
No Tool Resharpening
No Heat Affected Zones
No Stress Impact
No Dust or Fumes
No Crushing of Material
No metallurgical Deformations
No Major Loss Of Material
To learn more about water jet cutting, please contact us formore information.
| Model | CMT-F1212 | CMT-F1225 | CMT-F1830 | CMT-G2515 | CMT-G3020 | CMT-4020 | ||
| Structure | F-Flying arm | F- Flying arm | F- Flying arm | G-Gantry | G-Gantry | G-Gantry | ||
| Journey | X | 1250mm (48″) | 1250mm (48″) | 1850mm (72″) | 2500mm (96″) | 3050mm (120″) | 4000mm (156″) | |
| Y | 1250mm (48″) | 2500mm (96″) | 3050mm (120″) | 1525mm (60″) | 2000mm (78″) | 2000mm (78″) | ||
| Z | 155mm (6″) | 155mm (6″) | 155mm (6″) | 200mm (8″) | 200mm (8″) | 200mm (8″) | ||
| CNC | Windows XP. Japan servo motors, G-code running and PC basedWindows XP | |||||||
| Accuracy | Control | ±0.01mm | ||||||
| Repeatability | ±0.05mm | |||||||
| Cutting | ±0.1mm | |||||||
| Idle running speed | 0~6m/min | 0~8m/min | 0~8m/min | 0~10m/min | 0~15m/min | 0~15m/min | ||
| High pressure pump | KMT Jetline 50HP (37kw).55k psi,3 shifts | |||||||
| Power supply | 380V/50Hz/3ph or as request, 50KVA | |||||||
| Different table size, high pressure pump and CNC can becustomized according to the application and budget of thecustomers. | ||||||||
| Other features such as dual cutting heads, drilling or tappingcutting head, submerged cutting, skip&float for uneven platecutting and so on are available upon request | ||||||||
CNC Water Jet Cutting System
